Idiomas disponibles
Idiomas disponibles
Installation (continued)
B.2 FRAMED CABINET BRACKET INSTALLATION
Refer to the marking on brackets to determine their
correct installation side and orientation.
Flat end of the bracket with the arrow should face
towards you and the notched end should face the wall.
Align the bracket against the inside edge of the cabinet
frame and the back wall. Mark the location of 3 holes (out
Set the bracket aside and drill three 7/64" holes in the
Secure the bracket to the side frame using a screwdriver
and provided 18mm wood screws (AA). If a given
mounting hole instead.
Repeat the above procedure to install the remaining framed
cabinet bracket on the opposite side of the cabinet.
Please contact [email protected] or 1-888-449-9197
7/64"
13
Fig. 18
Fig. 19-1
Fig. 19-2
AA
Fig. 19-3
