Idiomas disponibles
Idiomas disponibles
FEATURES
ES
▶Power: 45W
▶Speeds: 3 levels
▶Fixed or oscillating position
PT
▶security grill
▶Blade diameter: 40cm
▶Heights: min.100 - max.120cm
EN
PARTES DEL VENTILADOR
1. Grid retaining ring
2. Front of the grille
FR
3. Propeller fixator
4. Propeller
5. Grid holder
6. Back of the grid
7. Engine
8. Dashboard
9. Oscillation regulator
10. Fixing screw
11. Telescopic top tube (chrome)
12. Fix ring
13. Telescopic lower tube (white)
14. Cover
15. Foundation
Instruction manual
ASSEMBLY INSTRUCTIONS
1. Remove all packaging carefully, avoid scratching plastic
covers with scissors or knives.
2. Assemble the base of the fan, joining it to the lower
telescopic tube.
3. Place on the motor shaft following the following order: the
rear part of the grille, the propeller and the front part of the
grille using the corresponding nuts and washers to fasten the
parts as shown in the upper diagram.
4. To fix both grids use the ring, and fix it with the security
screw.
5. Finally insert the part of the propeller with the motor into
the telescopic tube and then use the fixing screw to hold it
all together.
FUNCTIONING
▶Through the 3-speed system you can start the fan, this system is
IMPORTANT NOTES
▶Place the fan on a flat, dry surface.
▶Before connecting the device to the network, make sure that the
▶Plug the power cord into the outlet 220-240V~ 50/60Hz
▶If you do not use the fan for a long time, please unplug the power
▶Never try to disassemble the device where the motor is located.
designed to give you maximum flexibility. You can also activate the
oscillation function using the oscillation slider.
• PPOSITION 0: OFF position, no button pressed.
• POSITION 1: first gear
• POSITION 2: second gear
• POSITION 3: third gear
• SWING: swing button / set direction (num.9)
switch is in the "0" position.
cord from the outlet.
Ref. 33510
NOTAS IMPORTANTES
