Hilti SID 2-A12 Manual De Instrucciones Original página 12

▶ Use only Hilti Li­Ion batteries of the B 12 series with this product.
▶ Use only Hilti battery chargers of the C4/12 series for charging these
batteries.
3.3 Charge state display
The charge state of the Li­ion battery is displayed after pressing one of the
release buttons lightly (press only until slight resistance is felt).
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks.
Battery charge state cannot be displayed while the control switch is
pressed and for up to 5 seconds after releasing the control switch.
3.4 Items supplied
Impact screwdriver/wrench, operating instructions.
Spare parts, consumables and accessories approved by Hilti for use
with the product can be found at your local Hilti Store or online at:
www.hilti.group
4 Technical data
4.1 Technical data
Rated voltage
Weight
Rated speed under no load
Ambient temperature for operation
Storage temperature
8 English
Printed: 19.08.2019 | Doc-Nr: PUB / 5509360 / 000 / 00
Meaning
Charge state: 75 % to 100 %
Charge state: 50 % to 75 %
Charge state: 25 % to 50 %
Charge state: 10 % to 25 %
Charge state: < 10 %
2235359
*2235359*
SID 2­A12
10.8 V
1.1 kg
(2.4 lb)
0 /min ...
2,750 /min
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 70 ℃
(−4 ℉ ... 158 ℉)