Idiomas disponibles
Idiomas disponibles
PRODUCT SPECIFICATIONS
Chuck ........................................................................ 1/2 in.
Input ................................................................... 18 Volt DC
No Load Speed ......................................... Low 0-530 RPM
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
WARNING:
Do not allow familiarity with products to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict severe injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes, resulting in possible
serious injury.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.
WARNING:
Keep mixer and battery dry at all times. To minimize
splash, slow the speed before the mixer is inserted or
removed from the substance being mixed.
FEATURES
Basket Specifications: (Basket not included)
Max Basket Diameter .......................................... 16 1/2 in.
Max Extension Diameter ........................................... 1/2 in.
High 0-800 RPM
ASSEMBLY
Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to pos-
sible serious personal injury.
OPERATION
APPLICATIONS
You may use the product for the purposes listed below:
Mixing thinset, grout, mortar, paint, drywall mud, con-
crete, and leveling compounds
INSTALLING/REMOVING BATTERY PACK
See Figure 1, page 9.
To install:
Place the battery pack in the tool.
Make sure the latches on each side of the battery pack
snap into place and the battery pack is secured on the
tool before beginning operation.
To remove:
Depress the latches on the sides of the battery pack.
Remove the battery pack.
For complete charging instructions, see the operator's manu-
als for your battery pack and charger.
TWO-SPEED GEAR TRAIN
See Figure 2, page 9.
Select low speed (1) for applications requiring higher
power and torque, such as starting a mix and thicker
materials.
Select high speed (2) for well combined mixes and thin-
ner materials.
6 – English
WARNING:
