Cleaning And Maintenance; Storage; Dismantling And Disposal - Sonel LXP-2 Manual De Uso

9

Cleaning and maintenance

1. White plastic disc on top of the detector should be cleaned with a damp cloth (if necessary).
2. Do not store the device in conditions of excessive heat or humidity.
Calibration interval for the photodetector will vary depending on the operating conditions, but in
general, its sensitivity is reduced in direct proportion to the product of light intensity and operating time.
In order to maintain the basic accuracy of the meter, we recommend periodic calibration.

10 Storage

During the storage of the device, the following recommendations must be observed:

disconnect the probe from the meter

make sure that the meter and accessories are dry,

when the device is to be stored for longer time, remove the batteries

11 Dismantling and disposal

Worn-out electric and electronic equipment should be gathered selectively, i.e. it must not be
placed with waste of another kind.
Worn-out electronic equipment should be sent to a collection point in accordance with the law of
waste electrical and electronic equipment.
Before the equipment is sent to a collection point, do not dismantle any elements.
Observe local regulations concerning disposal of packages, waste batteries and accumulators.
LXP-2 ● LXP-10B ● LXP-10A – USER MANUAL
23