Charging The Lithium Iron Phosphate Battery Pack - Dometic PLB 40 Instrucciones De Uso

PLB40
Switching off the lithium iron phosphate battery pack
The battery pack switches off automatically after 24 hours if no load and no charger
are connected.
➤ Press the power button (fig. 2 1, page 2) for at least 3 seconds to switch the
device off.
✓ The device emits 1 beep.
✓ The display switches off.
6.3

Charging the lithium iron phosphate battery pack

!
WARNING! FIRE AND/OR EXPLOSION HAZARD.
Lithium iron phosphate batteries that are charged with too high voltage
can ignite. Use 8 to 25 V input voltage to charge the battery pack.
➤ Adjust the handle upwards.
➤ Place the lithium iron phosphate battery on a firm base.
Charging with the power supply unit
➤ Connect the power supply unit to the connection socket (fig. 2 8, page 2).
➤ Connect the power supply unit to the AC mains.
✓ The
symbol lights up.
✓ The display shows the charging status.
Charging with the smart alternator, 12 V accessory socket or solar panel
➤ Connect the charge cable to the connection socket (fig. 2 9, page 2).
➤ Connect the DC plug to the DC inlet Anderson socket on battery side.
✓ The
symbol lights up the battery state of charge as a percentage.
✓ The display shows the charging status.
EN
Using the appliance
11