Idiomas disponibles
Idiomas disponibles
English
5.2 How to program a SET
To program a specific SET, always select it before, then set up iRig Keys 2 as you prefer (see the Chapters
"Playing with iRig Keys 2" and "Edit mode"). Until the SET is not saved, the corresponding SET's LED will flash
periodically.
5.3 How to save a SET
To store a SET so that it will permanently save all settings that you have made, HOLD the SET button for two
seconds. The current SET LED will flash to confirm that the SET has been saved. Remember to always save a
SET if you have made modifications to it that you would like to keep.
6 Standalone mode
STANDALONE MIDI OUT
*
5V DC
* Power adapter not included
The iRig Keys 2 can work as a stand-alone controller when no host is connected. You can use the iRig Keys
2 to control an external MIDI module (using the physical MIDI OUT port), by connecting the iRig Keys 2's USB
to a power outlet using an optional USB power adapter. All the messages generated by the keyboard will be
routed to the MIDI OUT port. All the editing capabilities remain active, so it is still possible to edit the keyboard
and save sets. It is also possible to connect an external MIDI device to the MIDI IN port of iRig Keys 2: in this
situation the MIDI IN messages will be routed to the physical MIDI OUT port.
18
