Idiomas disponibles
Idiomas disponibles
5. Set warming time:
A
Press the Vessel/Volume/Units Button once or twice to choose the vessel material.
mL
Note: Select Glass Bottle for food jar.
B
Use the Up or Down Arrow Button to choose a preset volume of liquid.
If your volume of liquid is not an option, select closest preset below your
volume and manually increase time in the next step.
Note: Select 5 oz (150 mL) for food jar.
To change between oz and mL, hold the
C
Manual Time Adjustment: In Starting Temperature Condition mode, use
Up or Down Arrow Button to increase or decrease time.
Note: The last used warming time is remembered for your next use.
6. Press the
WARNING: DO NOT open lid or reach over the appliance while in
use, as steam will cause burns and serious injuries. DO NOT touch hot
surfaces, including lid and interior parts, during use.
7. When the cycle is complete, the display will flash 00:00 for 60 seconds and then shut
off, allowing contents to cool slightly before removal.
overheating. Gently stir or swirl content to ensure it warms evenly. DO NOT shake.
CAUTION: Open lid by front tab and carefully remove contents
by hand or with lift-out basket. Beware of steam and avoid spilling
or splashing water on yourself when removing contents.
Note: If removing lift-out basket, carefully empty liquid that collected from steam.
Plastic Bottle
Vessel/Units
Press the Starting Temperature Condition Button until the temperature
condition of the vessel appears.
Room Temperature
Starting
Temperature
Condition
Cycle Start Button.
Glass Bottle
Volume Amount
button for three seconds.
mL
Refrigerated
Timer Display
Promptly
remove vessel to avoid
Frozen
