Idiomas disponibles
Idiomas disponibles
this example, you will set the "carrier" frequency to 5 kHz and the "hop" frequency to 500 Hz, with an FSK rate of 100
Hz.
1. Select the function, frequency, and carrier amplitude.
Press [Waveform] > Sine . Press the Frequency , Amplitude , and Offset softkeys to configure the carrier waveform.
For this example, select a 5 kHz sine wave with an amplitude of 5 Vpp, with 0 V offset.
2. Select FSK.
Press [Modulate] and then select
ON
.
54
FSK
using the Type softkey. Then press the Modulate softkey to turn modulation
Keysight EDU33210 Series User's Guide
