Idiomas disponibles
Idiomas disponibles
Safety Instructions
NOTICE!
• Check that the voltage specification on the type plate
corresponds to that of the energy supply.
• Only connect the device as follows:
With DC cable to a DC plug socket in a vehicle (e. g. cigarette
–
lighter)
Or with AC power supply connection cable to AC mains supply.
–
• Never pull the plug out of a socket by the cable.
• If the cooler is connected to a DC socket: Disconnect the device
and other power consuming devices from the battery before
connecting a quick charging device.
• If the device is connected to a DC socket: Disconnect the device
or switch it off when you turn off the engine. Otherwise you may
discharge the battery.
• The cooling device is not suitable for transporting caustic
materials or materials containing solvents.
• The cooling device contains inflammable cyclopentane in the
insulation. The gases in the insulation material require special
disposal procedures. Deliver the device at the end of its life cycle
to an appropriate recycling facility.
2.2
Operating the device safely
CAUTION!
• Before starting the device, ensure that power supply line and
plug are in dry condition.
NOTICE!
• Do not use electrical devices inside the device unless
recommended by the manufacturer for the purpose.
• Do not place the device near open flames or other heat sources
(heaters, direct sunlight, gas ovens etc.).
• Danger of overheating!
