Idiomas disponibles
Idiomas disponibles
Operation
6.4
Switching off the cooler
• Empty the cooler.
• Switch off the cooler.
• Pull out the connection cable.
If you do not want to use the cooler for a longer period of time:
• Leave the cover slightly open. This prevents odor build-up.
6.5
Defrosting the cooler
Humidity can form frost in the interior of the cooling device or on the vaporizer. This
reduces the cooling capacity. Defrost the device from time to time to avoid frosting.
NOTICE! Danger of damage!
Never use hard or pointed tools to remove ice or to loosen objects which
have frozen in place.
To defrost the cooler, proceed as follows:
• Take out all contents from the cooler and place them in another cooling
device to keep them cool If necessary.
• If necessary, place them in another cooling device to keep them cool.
• Shut off the cooler.
• Leave the cover slightly open and wipe off defrosted water or/and pull
out drain plug (fig 6. 1).
6.6
Replacing the DC plug fuse (12V)
• Pull off the DC cigar plug head
• Unscrew the screw from the upper half of the housing.
• Carefully raise the upper half of the housing from the lower.
• Take out the contact pin
• Replace the defective fuse (with a new one that has the same rating
(10A, 250 V).
• Re-assemble the plug in the reverse order.
EN
