Idiomas disponibles
Idiomas disponibles
Positioning the Power Cord
1. Loosen, but do not remove, the screw holding the upper cord hook
2. Position the cord between the cord hook and the vacuum tube
Re-tighten the screw.
3. Once the cord is secured by the cord hook, proceed with wrapping the cord.
4. Wrap the cord clockwise around the top and bottom cord hooks
the plug to the wrapped cord using the channel on the plug. When not in use
store the appliance indoors in a clean dry area where it can't be damaged or
cause injury.
Note: Before wrapping the cord onto the unit, make sure it is unplugged from
the wall outlet.
ASSEMBLING THE VACUUM
Fig. 3
Fig. 5
(Fig. 4).
(Fig. 5).
(Fig. 6).
Fig. 4
Fig. 6
Fasten
9
