Idiomas disponibles
Idiomas disponibles
> Before start
> Hookup
1
BD/DVD
1 Digital coaxial cable, 2 Analog audio cable, 3 Speaker cable
16
> Setup
> Playback
2
OR
ZONE2 PRE/LINE OUT
> Part Names
MAIN ROOM
ZONE2
3
LINE
IN
ZONE SPEAKER
Multi-zone Connection
You can enjoy audio in the separate room by, for example,
playing a Blu-ray Disc player in the main room (where this
unit is located) and listening to internet radio in the
separate room (ZONE 2).
0 The audio from AV components can only be output to
ZONE 2 when the input is analog or 2 ch PCM audio
signals.
Connections with an AV component
When outputting the audio of an external AV component
to ZONE 2, you need to connect using an analog audio
cable or digital optical cable, or digital coaxial cable.
ZONE 2 PRE/LINE OUT
It is possible to play 2 ch source in a separate room while
7.1 ch source is being played in the main room. Connect
the ZONE 2 PRE/LINE OUT jacks of the unit and the
LINE IN jacks of the pre-main amplifier or the power
amplifier in a separate room with an analog audio cable.
ZONE SPEAKER
It is possible to connect speakers in a separate room and
play 2 ch sources.
0 You can play through a maximum of 5.1 channels in the
main room during ZONE 2 playback. Listening modes
such as the Dolby Atmos modes cannot be selected.
0 When Bi-Amping connection is used for the front
speakers, you cannot output to speakers in ZONE.
Setup
0 Settings are required in Initial Setup, "4. Multi
Zone Setup" ( P19) to enjoy this feature.
0 When you have connected AV components to
this unit using digital optical cables or digital
coaxial cables, change the settings on the AV
components so that they output PCM signals if you
want to output their audio to ZONE 2.
