Hansgrohe AXOR Urquiola 11901 1 Serie Instrucciones De Montaje / Manejo / Garantía página 2

English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate - showerhead
Flow rate - handshower
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• This product requires rough 10902181 (not
included). The rough must be installed and the
finished wall completed and made watertight
before installation of the column.
• Protection against backflow is provided by check
valves.
• The check valves should be inspected regularly
(at least once a year).
2
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
2.5 GPM
2.5 GPM
• To insure the long life of the thermostatic
• To prevent scald injury, the maximum output tem-
• This thermostatic mixing valve is for use with a
• Keep this booklet and the receipt (or other proof
cartridge, regularly run it through its complete
range of temperatures (full hot to full cold).
perature of the shower valve must be no higher
than 120°F. In Massachusetts, the maximum out-
put temperature can be no higher than 112° F.
showerhead rated at 2.5 GPM (9.5 L/min) or
higher.
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.