Tabla de contenido
T EC H N IC A L IN F O RMATION
Water pressure
Recommended
Maximum
Hot water temp.
Recommended
Maximum
Flow rate @ 44 PSI (0.3 Mpa)
handshower
tub filler
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
I NSTA LL AT I O N CO N SID E R ATI ONS
⁄ For best results, Hansgrohe recommends that this unit
be installed by a licensed, professional plumber.
⁄ Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
⁄ Inspect this product for shipping damage before
installation. Hansgrohe will not honor claims for
shipping damage after the product is installed.
⁄ Protection against backflow is provided by check
valve and an automatically resetting diverter.
Thi s tr im is fo r use wit h rou gh #10452181
(no t in c l uded ). T he roug h mu s t be
ins ta l led a n d t h e f inish e d f loor s ur face
com plet e d an d m ade wa te r tigh t.
2
15 - 75 PSI (0.1 - 0.5 MPa)
145 PSI (1 MPa)
120°-140° F (48° - 60° C)*
158°F (70° C)*
1.75 GPM (6.6 L/min)
5.3 GPM (20 L/min)
E N G L I S H
⁄ This unit is not anti-scald. If required by local code,
install in combination with an approved remote pres-
sure balance valve or other approved device.
⁄ To prevent scald injury, the maximum output tempera-
ture of the shower mixing valve must be no higher
than 120°F (49°C). In Massachusetts, the maximum
output temperature can be no higher than 112° F
(44°C).
⁄ The handshower is for use with an automatically
compensating valve rated at 1.3 GPM (4.9 L/min)
or less.
⁄ Keep this booklet and the receipt (or other proof of
date and place of purchase) for this product in a safe
place. The receipt is required should it be necessary
to request warranty parts.
Tabla de contenido
