Chicco Snappy Instrucciones De Uso página 15

Do not tumble dry
re
Do not iron
an
Do not dry clean
Periodically wipe clean plastic parts with a soft damp cloth. Always
t.
dry the metal parts to prevent the formation of rust if the stroller has
er
come into contact with water.
Certain models include a seat pad which should be cleaned following
s.
the instructions on its care label
er
MAINTENANCE
Lubricate the moving parts only if necessary, with the light application
at
of a silicone based lubricant. Regularly check the condition of the
wheels and, keep them clean of dust and sand. To avoid friction that
th
may prevent the correct operation of the stroller, ensure that all the
movable plastic parts placed
ce along the metal frame are clean of dust, dirt or sand. Keep the stroller
in a dry place.
es
LIST OF COMPONENTS
Check that you have all the parts required for this model before
or
assembling the product. If any parts are missing, please contact the
ol
Chicco Customer Care Service. No tools are needed to assemble the
product. The following parts are needed to assemble the product:
1 stroller
nd
1 hood
1 rain cover
1 stroller carry bag (79255.XXX.930)
he
1 carry-all basket (79255.XXX.930 / 79259)
1 shoulder carry strap (79254)
1 seat pad (79254)
er
OPENING INSTRUCTIONS
gs
1. Release the closure latch (diag. 1)
.
2. Open the stroller (diag. 2).
3. Press the safety lock down with your foot as shown in the drawing
un
(diag 3.) WARNING: pushing down the bar C which connects the two
wn
rear wheels (see 'components') does not guarantee that the stroller is
ed open correctly.
4. Fit the sun hood (diag. 4A) on the stroller, by turning it towards
he
the front and use the Velcro fasteners on the edges to secure it to the
frame (diag. 4B)
WARNING: ensure that the sun hood is securely fitted on the relative
ed
support by pressing it downwards until you hear it click into place.
ot
RECLINING THE BACKREST
5. The backrest can be reclined to 2 different positions. After releasing
a
the clips on the backrest (diag. 5 A), open the zips on either side of
the seat (diag. 5 B).
as
WARNING: this adjustment is more difficult when the child is seated
in the stroller. We recommend you adjust the backrest before placing
your child in the seat.
to
BRAKES
he
6. To apply the brakes, press the levers on the rear wheels downwards
(diagram 6). WARNING: the brakes are connected and are applied
together.
When the brake levers are up, the wheel brake is off.
THE BRAKES MAY NOT FUNCTION AT THEIR OPTIMUM LEVEL ON
ld
STEEP SLOPES.
WARNING: Always apply the brakes whenever the stroller is
stationary. Never leave the stroller on a sloping surface with a child
inside, even with the parking brake ON.
WARNING: after applying the brake lever, check that the brakes are
locked in place on both rear wheels.
mp
els
FRONT SWIVEL WHEELS
he
The stroller has front swivel wheels.
7. To unlock the swivel wheels, lower the lever fitted between the two
wheels (diag. 7). Use the swivel wheels on smooth surfaces. To lock the
wheels, pull the lever in an upward direction.
WARNING: the swivel wheels make the stroller easier to manoeuvre;
it is however recommended to use the wheels in a locked position
on uneven ground to guarantee better stability (on gravel, unpaved
roads etc.)
WARNING: Both wheels must be locked or unlocked at the same time.
SAFETY HARNESS
8. All strollers are fitted with a 5 point safety harness (diag. 8A). Adjust
the shoulder straps so they fit over the child's shoulders. Always use
the safety harness together with the crotch strap. Always check that
the safety harness is fitted correctly. WARNING: the safety harness
must always be fastened to guarantee complete safety for your child.
For extra safety, the stroller is fitted with D rings, which can be used
to fit a separate safety harness, compliant with BS 6684 Standards.
The rings are fitted on the right and left side of the stroller seat, as
seen in points A and B.
Snappy Deluxe: Diag. 8B-8C. Bring the upper harness strap clasp (A)
in line with the triangle on the lap belt clasp (B) and then insert them
both in the harness buckle (C). Press the centre button (D) to release
the safety harness straps.
CLOSING THE STROLLER
WARNING: when closing the stroller, ensure that your child and
all other children are at a safe distance. Ensure that during these
operations the moving parts of the stroller do not come into contact
with your child.
9. To close the stroller, pull the sun hood back, release the lock
system 1 (see 'components') by pulling it towards you in a downward
direction; then push it upwards to unlock the main locking system
(diag. 9 A).
WARNING: THE STROLLER FEATURES A SECONDARY LOCKING
SYSTEM TO PREVENT ACCIDENTAL CLOSURE. DO NO TRY TO
CLOSE THE STROLLER WITHOUT UNLOCKING THE SECONDARY
LOCKING SYSTEM (see 'components').
To release the secondary locking system, press the red pedal shown
in the diagram (diag. 9 B).
10. Push the handles in a forward direction and fold the stroller until
it is completely closed (diag. 10).
11. When it is closed, the hook on the side automatically locks the
stroller (diag. 11 A) to prevent it from accidentally opening. The rear
wheels can be locked in place so the stroller can be simply stood up,
rested against a vertical surface, on its own (diag. 11 B).
ACCESSORIES:
WARNING: The accessories described below are not necessarily
available on some versions of the product. Please read the
instructions relative to the accessories fitted on the type of stroller
you purchased carefully.
RAIN COVER
12. The stroller is also fitted with a practical and light rain cover. Open
the rain cover and fit it over the sun hood until it covers the whole
stroller. Fasten the rain cover to the front legs and sides of the stroller
using the Velcro fasteners (diag. 12).
WARNING: pay particular attention when using the rain cover.
WARNING: The rain cover cannot be used on a stroller that has no
canopy or sun-hood as it could suffocate the child. When the rain cover
is fitted on the stroller, never leave it exposed to direct sunlight with
the child inside, as the temperature will rise considerably.
CARRY BAG
13. The stroller also includes a handy carry bag for use when storing
or carrying it (diag. 13 A); open the bag and place the folded stroller
inside, as seen in diagram 13 B.
CARRY STRAP
14. The stroller comes with a carry strap to carry it around when not
in use (diag. 14). The strap can be used fitted to the stroller or to the
carry bag.
FITTING THE MATTRESS
Fasten the mattress to the stroller seat using the flap on the back, as
seen in diag. 15 (when using in double face mode, turn the flap over
beforehand).
Thread the crotch and shoulder straps through the slots, as seen in diag. 16.
Now fasten the mattress to the stroller backrest using the velcro
straps on the upper section of the mattress.
Warning: only use the mattress when it is correctly fastened to the
frame and the harness straps are all done up.
15