Idiomas disponibles
Idiomas disponibles
Recommended cutting equipment
A specific chainsaw model has to be evaluated with
the cutting equipment to be recommended and fulfill the
requirements in ANSI B175.1-2012 (Internal Combustion
Engine-Powered Hand-Held Chainsaws - Safety and
Environmental Requirements) and Canadian Standards
CSA Z62.1-15 (Chainsaws) and CSA Z62.3-11 (R2016)
(Chainsaw kickback).
Chainsaw models Husqvarna 562XP Mark II, 562XPG
Mark II met the safety requirements in ANSI
B175.1-2012 and Canadian Standards Association CSA
Z62.1-15 (Chainsaws) and CSA Z62.3-11 (R2016)
(Chainsaw kickback), when equipped with the below
listed saw chain and guide bar combination(s).
Note:
Other chainsaw models may not meet the
kickback requirements when equipped with the listed
guide bar and saw chain combinations.
Approved cutting equipment for Husqvarna 562 XP Mark II, 562 XPG Mark II:
Guide bar
Length, in/cm
Pitch, in
15/38
3/8
16/40
18/45
20/50
24/60
28/70
16/40
3/8
18/45
20/50
24/60
28/70
24/60
3/8
28/70
24/60
3/8
28/70
2053 - 001 - 18.04.2023
Accessories
Gauge, in/mm
Max. nose ra-
dius
0.058/1.5
11T or 34 mm
0.050/1.3
11T
11T or 34 mm
11T
0.058/1.5
11T or 34 mm
0.050/1.3
11T or 34 mm
11T
We recommend only to use the listed guide bar and saw
chain combinations.
Low kickback saw chain
A saw chain that is designated as Low kickback saw
chain, meets the low kickback requirement specified in
ANSI B175.1-2012.
Kickback and guide bar nose radius
For sprocket nose bars the nose radius is specified by
the number of teeth, such as 10T. For solid guide bars
the nose radius is specified by the dimension of the
nose radius. For a given guide bar length, you can use a
guide bar with smaller nose radius than given.
Saw chain
Type
Husqvarna
C85
Husqvarna
C83
Husqvarna
C85S
Husqvarna
C83S
Husqvarna
C83SK
Length, drive
Low kickback
links (no.)
56
60
68
72
84
92
60
68
72
84
92
84
92
84
92
35
