Buffalo GH125 Manual Del Usuario página 4

UK
Fitting the Element and Control box to the Fryer body.
Position the Element/Control Box into the body of the fryer, locating it into the lugs at the rear of
the Fryer body, using the bracket on rear of the Control Box. Once the rear of the control unit (A)
is clipped into the lugs on the main body (B), ensure that the safety switch (C), and the location
plate (E) on the base of the control unit, is correctly aligned with the slots (D) and (F) in the main
body, before the element is lowered into its operating position in the pan. Locate Electrical box
support (G) in main body (H). Place the guard over the element at the bottom of the pan.
The fryer can now be filled with the appropriate cooking oil.
Connect the Fryer to the correct power supply and it is ready to operate.