Roborock Dyad Pro Manual Del Usuario página 19

Routine Maintenance
3. Allow up to 24 hours for all parts drying and install them back
in place.
Notes:
• Use a second filter if necessary.
• Do not touch the filter with your hands, brushes, or sharp objects to avoid damage to the filter.
Cleaning the Rollers
1. Remove the vacuum cleaner from the charging dock, switch it off.
2. Place the vacuum on a hard and flat floor and lock the cleaning
head.
3. Rotate the rear roller cover to the unlock position, and pull the
rear roller outward.
4. Pinch the left and right front rollers with both hands, and pull
them outward.
5. Cut off any hair entangled on the rollers and remove any debris
using the provided maintenance brush.
Note: Use the maintenance brush carefully to avoid injury.
6. Insert the rear roller from the side, and then rotate the rear
roller cover from the unlock position to the lock position until it
clicks in place.
Click Click
18