Idiomas disponibles
Idiomas disponibles
Before You Begin
Tools
Gather required tools and parts before starting installation. Read
and follow the instructions provided with any tools listed here.
1.
Regular screwdriver
2.
Phillips screwdriver
3.
7/16" and 1/2" open-end wrenches (or an adjustable wrench)
4.
Pliers
5.
1/4" nut driver
6.
Small hand level (optional)
7.
Ruler
Components
Remove the contents from the shipping carton and set them on
a table where they can be easily identified and located. Check all
of the components in the kit against the following list to help you
become familiar with them. When you identify a component, place
a check mark (
) after it. The KEY numbers correspond to the
✔
"Component Illustrations."
Do not discard any of the packing material until you account for all
of the components.
KEY
QTY DESCRIPTION
Ice maker
1
1
Ice bucket
2
1
Jumper harness
3
2
All manuals and user guides at all-guidesbox.com
Installation notes
1. Follow the instructions thoroughly. Read through the entire
step so that you understand it before you perform it.
2. The illustrations in this Installation Guide are meant to clarify
the installation steps you need to perform. For each set of
steps shown, refer to the diagram immediately beside or
below the text for clarification. Some illustrations also contain
"DETAILS." DETAILS are contained in bubbles alongside the
larger illustration. A DETAIL shows a close-up illustration of
a certain portion of a diagram or an illustration of a specific
step you are to perform. DETAILS are labeled A, B, or C and
are clearly referenced in each step.
3. When you are instructed to install a part, position the part as
shown in the illustration.
Component Illustrations
4
