Sensors - Chauvin Arnoux C.A 876 Manual De Instrucciones

●
Battery: Standard 9V battery (NEDA 1604, IEC 6F22 006P , or equivalent)
●
Battery Life: 100 hours (continuity) typical with carbon-zinc battery
(Back-Light not illuminated)
●
Dimensions: 173mm(H) x 60.5mm(W) x 38mm(D)
●
Weight: 183g including batteries
●
Safety: EN61010-1 (1995-A2), Protection Class III
Overvoltage Category (CAT III, 24V), Pollution Degree 2, Indoor Use
6.

SENSORS

The following K-type thermocouple sensors can be used with
thermometers C.A 861 and C.A 863.
Sensors with grips and extendible spiral leads
Model Reference Measurement Response
SK 11 Needle P03.6529.17 -50...+600°C
For penetration of viscous thick substances.
SK 13 P03.6529.18 -50...+1100°C
General purpose
All uses
SK 14 P03.6529.19 -50...+450°C
Curved surface
For temperature measurement of poorly accessible surfaces. End Ø 15 x 30 mm
SK 15 Surface P03.6529.20 -50...+900°C
8 mm Ø spring-loaded end, ensuring optimum contact even when the
sensor is not perpendicular to the surface.
SK 17 Air P03.6529.21 -50...+600°C
For measurement of ambient air temperature. Thermocouple is protected
by a 8.5 mm Ø metal shield
PK 9 P03.6529.15 -20...+250°C
Retractable needle
Designed for automobile pneumatics. Penetrates by up to 15 mm.
Sensors without grips *
SK 1 Needle P03.6529.01 -50...+800°C
For penetration of viscous, thick substances.
SK 2 P03.6529.02 -50...+1000°C
Bendable
Bendable as required for application.
SK 3 P03.6529.03 -50...+1000°C
Semi-rigid
Slightly bendable.
SK 4 Surface P03.6529.04
Suited to measurement on small surface areas.
SK 5 Surface P03.6529.05 -50...+500°C
8 mm Ø spring loaded end, ensuring optimum contact even when the
sensor is not perpendicular to the surface.
*
to be used between 0 and 50°C
Dimensions
range time (mm)
12 s Ø 3 - L = 130
12 s Ø 3 - L = 300
8 s Ø 6 - L = 130
2.3 s Ø 8 - L = 130
2.6 s Ø 6 - L = 130
5 s Ø 1 - L = 55
1 s Ø 3 - L = 150
2 s Ø 2 - L = 1000
6 s Ø 4 - L = 500
0...+250°C 1 s Ø 5 - L = 150
1 s Ø 5 - L = 150
20