Idiomas disponibles
Idiomas disponibles
Power Focus 4000
Operating instructions
Program a Pset - Compact
Press the AUTOSET key and ASEt/Ft appears on the display
1.
2.
Choose final torque target by pressing +/- keys
Press the ENTER key to activate the Autoset function
3.
The Autoset symbol LED lights up
4.
5.
Make 5-8 tightening until the LED goes out
Optimum performance has been found and the system is ready for production.
Program a Pset - Graph
Press the PROG key and select Pset then Quick Prog with the arrow keys
1.
Enter the final torque target with the alpha-numerical keys
2.
3.
Press the ENTER key to activate the Autoset function
The Autoset symbol LED lights up (the LED is placed at the very bottom on
4.
the right side of the front panel)
Make 5-8 tightening until the LED goes out
5.
Press the RESULT key
6.
Optimum performance has been found and the system is ready for production.
Preventing ESD problems
The components inside the tool and controller are sensitive to electrostatic dis-
charge. To avoid future malfunction, make sure that service and maintenance is
carried out in an ESD approved work environment. The figure below shows an
example of an appropriate service work station.
EN
© Atlas Copco Industrial Technique AB - 9839 001800 00
Operation
11
