Idiomas disponibles
Idiomas disponibles
ENGLISH
(3) Connecting to a AV amplifier with a built-in decoder
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital or DTS bitstream signals are output from the DVD player's digital audio
output connectors. If a Dolby Digital or DTS decoder is connected, you can achieve sound with the power and sense of presence of a movie
theater or concert hall.
DVD-2900
Front speaker (left)
Surround speaker (left)
NOTES:
• Harsh noise that could harm your ears or damage the speakers is generated when a DVD recorded in DTS is played while using a
decoder, etc., that is not DTS-compatible.
• When playing copyright-protected linear PCM or packed PCM DVDs, in consideration of copyrights, no digital signals are output for
sources exceeding 48 kHz/16 bits. When playing such sources, either set "LPCM (44.1 kHz/48 kHz)" under "AUDIO SETUP" at
"SETUP" to "ON" (see page 33) or make analog connections. (See page 14.)
• When making digital connections to an AV amplifier that is not compatible with 96 kHz/88.2 kHz signals, set "LPCM (44.1 kHz/48 kHz)"
under "AUDIO SETUP" at "SETUP" to "ON". (See page 33.)
• With Super audio CDs, digital audio signals cannot be output. Use analog connections. (See page 14, 15.)
2 Connecting an optical fiber cable (commercially available) to the digital audio input connector (OPTICAL)
Dust cap
Remove the dust cap, line up the cable in the proper directly, then
insert it securely as far as it goes.
12
75Ω/ohms pin-plug
Optical fiber cable
cable (commercially
(commercially
available)
available)
Digital audio input
Digital audio input
connector (COAXIAL)
connector (OPTICAL)
SURROUND MODE
DOLBY
DTS
WIDE
5CH / 7CH
DSP
DIRECT
STEREO
SURROUND
SURROUND
SCREEN
STEREO
SIMULATION
PHONES
INPUT
CINEMA /
6.1 / 7.1
VIDEO
TONE
MODE
ANALOG
EXT. IN
MUSIC
SURROUND
ON / OFF
DEFEAT
INPUT
AV amplifier with a built-in decoder
(AV control center)
Line up in proper direction
Center speaker
Front speaker (right)
Subwoofer
Surround speaker (right)
MULTI FUNCTION
MODE
FUNCTION
CONTROL
STATUS
SELECT
REC /
M-ZONE 1
M-ZONE 2
REC SELECT / M-ZONE
NOTE:
• Store the dust cap in a safe place, and be careful not to lose
it.
When not using the terminal, attach the cap to protect the
terminal from dust.
To power outlet
