Idiomas disponibles
Idiomas disponibles
Controls and Features
Fuel Cap
Starter Handle
Oil Fill Cap
Oil Drain
Primer
(If Equipped)
The primer is located on the front of the
air cleaner. Pressing the primer forces fuel
directly into the engine's carburetor to aid in
starting the engine.
Engine Switch
(If Equipped)
The engine switch is located on the engine. Turn the switch "On"
when starting the engine and turn it to "Off" when you want to
shut it down.
Choke
(If Equipped)
The choke control is located on the engine above the engine
switch and when activated, closes the choke plate on the
carburetor and aids in starting the engine. Pull the choke control
to activate the choke on the engine. Use of the choke may not be
necessary if the engine is warm or the air temperature is high.
8
Muffler
Figure 4-1
Engine
Switch†
Fuel Shut-Off Valve†
Spark Plug
Fuel Shut-Off Valve
(If Equipped)
The fuel shut off valve is located on the engine below the choke.
Be sure the valve is on before starting the engine. Turn the valve
off when towing or transporting equipment.
Oil Drain
Removing the oil drain plug will drain the oil from the engine.
The engine is equipped with a side drain, and on select units, you
may also access a bottom drain.
Oil Fill Cap
Remove the oil fill cap to check the oil level and add oil.
Fuel Cap
Remove the fuel cap to add fuel.
4
Choke†
Air Cleaner
Primer†
† If Equipped
