Create WIND CALM Manual Del Usuario página 6

ENGL ISH
Thank you for choosing our ceiling fan. Before using the appliance, and to ensure the best
use, please read these instructions carefully.
The safety precautions included in this document reduce the risk of death, injury, and elec-
tric shock when properly followed. Keep the manual in a safe place for future reference,
along with the complete warranty card, sales receipt, and package. If applicable, please
forward these instructions to the next owner of the appliance. Always follow basic safety
precautions and accident prevention measures when using an electrical appliance. We do
not assume any responsibility for the breach of these requirements by the customer.
LOCATION AND INSTALLATION REQUIREMENTS
M EC HAN ICAL I S S U E S
• According to safety regulations, the lowest point of the fan blade must be at least 2.3m (7
feet) from the floor.
• Please make sure the chosen location will not allow the rotating fan blades to come into
contact with any objects.
• Ensure ceiling joists are sound and are large and strong enough to support the weight of
the fan.
• To reduce the risk of fire, electric shock or personal injury, ensure that the fan mounting
bracket is attached directly to the building structure. DO NOT mount to an outlet box.
• The mounting bracket must be firmly screwed to a load bearing structure, e.g. a concrete
ceiling, steel structure or timber frame. If a timber frame is added, it must be securely
nailed or screwed between two beams.
• To reduce risk of personal injury and property damage, do not bend or damage the downrod
or the fan blades when handling or installing them. If you notice any product imperfections,
please contact our after-sales service before proceeding to install the fan.
• Make sure the ceiling fan is securely fastened to the ceiling. All set screws must be
checked and re-tightened where necessary before fan operation.
E LECTR I CAL IS S U E S
• Always turn the power off before servicing the ceiling fan, and turn off the circuit breaker
that feeds the power to the light. To avoid possible electric shock, make sure electricity is
turned off at the fuse box or circuit breaker panel before wiring.
• The fan, mounting bracket and light kit must be earthed. Ensure all spliced connections are
adequately insulated.
• Check and confirm that all connections are proper and secure. When all the electrical con-
nections are done, store all wires neatly.
• Do not attempt to control this fan from any wall switch or remote control that is not ap-
proved by the manufacturer for use with this fan. DO NOT use a solid state controller. The
use of an unapproved wall switch or remote control will void the warranty.
• Do not connect the ceiling fan to a dimmer switch or a regulator.
E NGL I SH
6