Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
PROBLEM
Motor fails to start.
Power head stops
during operation.
Uneven edge.
CAUSE
◾
The battery pack is not
attached to the power
head.
◾
No electrical contact
between the power head
and the battery pack.
◾
The battery pack is
depleted.
◾
The lock-off lever and
trigger are not depressed
simultaneously.
◾
The motor is overloaded.
◾
The battery pack or the
power head is too hot.
◾
The battery pack is
disconnected from the tool.
◾
The battery pack is
depleted.
◾
Grass or soil edged is
too wet.
◾
Blade guard is clogged.
EDGER ATTACHMENT — EA0800/EA0800-FC
SOLUTION
◾
Attach the battery pack to the power
head.
◾
Remove the battery, check contacts
and reinstall the battery pack until it
snaps into place.
◾
Charge the battery pack with EGO
chargers listed in this manual.
◾
Press down the lock-off button and
hold it, then depress the trigger to
turn on the edger.
◾
The motor will recover when the
load is removed. For continuous
working, decrease the load on the
power head.
◾
Allow the battery pack or power
head to cool until the temperature
drops below 152°F (67°C).
◾
Re-install the battery pack.
◾
Charge the battery pack with EGO
chargers listed in this manual.
◾
Avoid edging in wet soil or wet
grass.
◾
Stop the motor, remove the
battery pack, and remove debris
from the blade guard.
23
