Idiomas disponibles
Idiomas disponibles
Step 3 (optional): Space-saving wall mount to install the cartridge
under the sink
During assembly, note the installation dimensions, bending radius of
the hoses and dimensions of the accessories. The system can be
operated vertically and horizontally. When using the wall mount, install
vertically only!
A. Attach the wall mount (16) in place using two matching screws and use two
wall plugs, if necessary, depending on the type of wall (not in scope
of supply).
B. Pull out securing pin (17) out of wall mount (16).
C. Locate the filter head (6) in the wall mount (16).
A
B
17
C
16
16
16
6
D. Insert securing pin (17) into filter head (6) using the prepared holes on the
left or the right side of the wall mount (16). Turn the handle of the securing
pin (17) into vertical position to secure the filter head in place.
E. Turn securing pin (17) one quarter clockwise to adjust it.
16
D
17
E
17
Step 4: Commissioning
Before use, make sure that you have followed all the steps correctly and all
the parts are fitted. Place a cloth and bucket under the cartridge to catch any
leakages.
A. Turn on the cold water supply and check the system carefully for any leaks.
B. Open the valve on your tap and let the water run for 1–2 minutes
(minimum 5 litres).
6
9
