Idiomas disponibles
Idiomas disponibles
Safety Rules - Read and Save These Instructions
1.
To reduce the risk of electric shock, ensure electricity has been
turned off at the circuit breaker or fuse box before beginning.
All wiring must be in accordance with the National Electrical
2.
Code "ANSI/NFPA 70-1999" and local electrical codes. Electrical
installation should be performed by a qualified licensed
electrician.
WARNING: To reduce the risk of electrical shock or fire, do not
3.
use this fan with any solid-state fan speed control device. It will
permanently damage the electronic circuitry.
4.
CAUTION: To reduce the risk of personal injury, use only the
screws provided with the outlet box.
5.
The outlet box and support structure must be securely mounted and
capable of reliably supporting a minimum of 35 pounds. Use only
UL Listed outlet boxes marked "FOR FAN SUPPORT".
6.
The fan must be mounted with a minimum of 7 feet clearance from
the trailing edge of the blades to the floor.
7.
Avoid placing objects in path of the blades.
To avoid personal injury or damage to the fan and other items, be
8.
cautious when working around or cleaning the fan.
9.
Do not use water or detergents when cleaning the fan or fan blades.
A dry dust cloth or lightly dampened cloth will be suitable for most
cleaning.
1
After making electrical connections, spliced conductors should be
10.
turned upward and pushed carefully up into outlet box. The wires
should be spread apart with the grounded conductor and the
equipment-grounding conductor on one side of the outlet box and
ungrounded conductor on the other side of the outlet box.
11.
All set screws must be checked and retightened where necessary
before installation.
WARNING
TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE
BLADE ARMS (ALSO REFERRED TO AS FLANGES), WHEN
INSTALLING THE BRACKETS, BALANCING THE BLADES OR
CLEANING THE FAN. DO NOT INSERT FOREIGN OBJECTS IN –
BETWEEN ROTATING FAN BLADES.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL
INJURY, MOUNT FAN TO OUTLET BOX MARKED ACCEPTABLE FOR
FAN SUPPORT WITH THE SCREWS PROVIDED WITH THE OUTLET
BOX.
