Ingersoll Rand SCHLAGE BE469NX Guia Del Usuario página 4

Idiomas disponibles

Idiomas disponibles

locK PaRTs
DOOR EXTERIOR
Touchscreen
Inside schlage
Button
Thumbturn
outside schlage
Button
Touchscreen
cylinder
alarm speaker
Bolt
RePlacING THe BaTTeRIes
L Replace the batteries in your lock at the same
time each year that you test and replace the
batteries in your smoke alarms. This will ensure
continued reliable operation.
L Use four high-quality alkaline AA batteries for
replacement. Lithium batteries may cause undesirable operation.
1. Remove the inside cover.
4
Outside
Schlage Button
Touchscreen
Cylinder
• Located on the inside of the door.
• Has three distinct lights.
• Used to program the alarm. see Programming the alarm on
page 8.
• Does not lock or unlock the door.
• Used to lock and unlock manually from the inside.
• Located on the outside of the door.
• The first button you will press when entering a User Code and in
the programming process.
• Press to exit programming mode immediately.
• Remains unlit until the Outside Schlage Button is pressed.
• Located on the outside of the door.
• Used to enter codes for programming and unlocking.
• Used to unlock only in emergency situations. see emergency Key
override on page 12.
• Sounds alarms based on the chosen settings. see Programming
the alarm on page 8.
• Automatically extends and retracts when the touchscreen is used.
• Manually extends and retracts when the thumbturn is rotated.
2. Unsnap the battery
connector, remove the
battery tray and replace
the batteries.
DOOR INTERIOR
Alarm
Alarm Speaker
Inside Schlage
Button
Thumbturn
Bolt
elecTRosTaTIc DIscHaRGe
DO NOT TOUCH the circuit board!
You may damage the lock.
3. Replace the battery
WaRNING!
tray with the batteries
facing the door. Snap
the battery connector to
the tray and replace the
cover.
loading

Este manual también es adecuado para:

Schlage be469