Medtronic GUARDIAN LINK 3 Manual Del Usuario página 28

To clean and disinfect the transmitter:
1. Wash your hands and put on gloves.
2. Inspect the inside of the transmitter's connector opening for any sign of body fluid. For
instructions on how to inspect the connector pins, see Inspecting the transmitter connector
pins, page 21.
CAUTION: The person inspecting the transmitter must have sufficient vision that
enables him or her to see small drops of body fluid or debris.
WARNING: If you see any body fluid in the connector opening, you must discard the
transmitter. Because the transmitter contains a battery, do not discard in a bio-waste
container. Instead, continue to clean and disinfect the transmitter, and then discard
according to local regulations for battery disposal (non-incineration).
Figure 6. Transmitter components
3. Attach the tester to the transmitter to create a waterproof seal.
connector opening
connector pins
housing
28