Idiomas disponibles
Idiomas disponibles
Configuring the remote control device (for Android)
1. Install and connect the device according to the connection diagrams shown
in this manual.
2. On Tuo Wi-Fi , hold down the
shows " Conf nEt" and the
steady before proceeding with the next point).
3. Start the app, choose "New Thermostat", select the TUO model among those
available and press "Next".
4. Connect to the "iwm..." network generated by the device following the instructions
on the App. Wait for the device display to show the
successful connection between the app and the device.
5. Now choose the Wi-Fi network to connect the device to and enter the password,
be careful to digit faithfully all characters (uppercase, lowercase, spaces,
digits) that compose them. Confirm to continue.
Important: before proceeding make sure that the
is still on. Otherwise, access the Wi-Fi settings of the smartphone to manually
reconnect to the "iwm ..." network.
6. Enter a name that identifies the Tuo Wi-Fi, the PIN (4 digits shown on the display
of Tuo Wi-Fi) and choose an icon to help identify the device from those
proposed and confirm.
The configuration procedure is finished. At this point:
the app displays the list of devices associated with your account
among which also the newly associated device must appear.
Tuo Wi-Fi displays the main screen.
Check that the icon
and
keys simultaneously until the display
icon starts flashing (wait for it to become
is steady and the time shown at the top left is correct.
- 44 -
OB326900 Chronothermostat User Manual
icon to indicate the
icon on the device display
