Using The Memory; Storing A Reading; Recalling From Memory; Clearing The Memory - OHAUS STARTER ST300C-B Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

EN-10
4.4

Using the memory

4.4.1

Storing a reading

The STARTER 300C can store up to 30 results. Press
endpointed. M01 indicates that one result has been stored.
If you press
when M30 is displayed, FUL indicates the memory is full. To store further data
you will have to clear the memory (see section 4.4.3)
4.4.2

Recalling from memory

Press and hold
endpointed.
Press
or
is being displayed. Press
4.4.3

Clearing the memory

Continue pressing
Then press
, CLr blinks. Press
the measurement mode without deleting the data.
STARTER 300C 300C Portable Conductivity Meter
to recall the stored values from memory when the current measurement has
buttons to scroll through the stored results. R01 to R30 indicates which result
to exit.
or
buttons to scroll through the stored results until MRCL appears.
again to confirm the deletion or press
when the measurement has
to return to
Tabla de contenido
loading

Este manual también es adecuado para:

Starter 300cStarter ic-st300c-gStarter st300c-g

Tabla de contenido