Idiomas disponibles
Idiomas disponibles
Do not overload the cup (J). If the motor
sputters, switch off the product immediately,
and let the motor unit (F) cool down for at
least 10 minutes.
Prepare the fruits and/or vegetables by
cutting them into small pieces no larger than
2cm.
Fill the cup (J) with the prepared ingredients.
Add adequate drinking water or milk to taste.
Make sure that the ingredients do not exceed
the "Max" level (K) on the cup (J).
Fix the motor unit (F) onto the cup (J) by turn
it clockwise.
NOTE: The blue and red indicator (C) �ashes
1 time once they are in place.
Double click the switch (D) to start and shake
the blender while blending.
NOTE: The blue indicator (C) lights up during
the blending process.
Each cycle will stop automatically after 40
seconds.
NOTE: The blue indicator (C) goes off at the
end. Depending on the results, you may wish
to run the cycle again.
Turn the product 180°, and open the cup (J).
If the product runs out of power, recharge it
using the USB cable provided. The product
cannot be used during charging.
Once the indicator turns blue, the charging
process is complete.
20
Cleaning and maintenance
Always clean the product immediately after
each use.
Caution: The edges of the blades are very
sharp. Handle with care.
Turn the motor unit (F) and the cup (J)
counterclockwise to disassemble when the
blade (H) stops running completely before
cleaning.
Rinse the inside of the motor unit (F), sealing
ring (G) and blade (H) under tap water
carefully.
Never immerse the motor unit (F) in water or
any other liquid.
Remove the sealing ring (G) with something
small and blunt if necessary.
Clean the cup (J) in water.
After cleaning, put the sealing ring (G) back
into place of the motor unit (F).
When not using the product for a prolonged
period of time, store it in a well ventilated,
dry place to prevent the motor from being
affected by humidity.
Do not wash in a dishwasher.
