Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTALLATION
Note:
A mounting kit is available for installing
the COUNTIS on the front of cabinets.
Please contact us for further information.
Recommendations:
Install at a minimum distance of 30 cm
from a disconnection device (switch,
contactor, etc.).
Avoid installing near systems which
generate electromagnetic interference.
Avoid vibrations with acceleration of over
1 G for frequencies below 60 Hz.
Note:
The minimum torque for the fixed
terminal is 0.8 Nm.
Recommendation:
We recommend that the
auxiliary voltage and the
voltage inputs should be
protected with 0.5 A fuses.
SOCOMEC - Réf. : 875 503D
The COUNTIS can be installed on a DIN
EN 50022 rail (DIN 43880).
CLIMATIC ENVIRONMENT
To guarantee optimum operation, it is
recommended that this device is used
between -10 to +60°C with a relative
humidity of between 20 and 95%.
CONNECTION
Connection by 3 fixed terminals (6 mm
11
2
5
8
14
12 13
COUNTIS AT
1
3
4
6
7
9
SAFETY INSTRUCTIONS (U, I, F)
To avoid damaging the device, take care
to observe the following before connec-
ting the device:
• indications on the casing,
• supply voltage: 230 or 400 V AC ± 15%,
• network frequency: 50 or 60 Hz,
• maximum permanent voltage at
voltage input terminals of 500 V AC
phase/phase or 289 V AC between
phase/neutral,
• maximum permanent current of 7 A
(connection from current transformer(s).
2
).
21
20
19
18
17
16 15
11
Tabla de contenido
