Whalen Stetson SMSSDSK Manual Del Usuario página 6

Step 1
H1 x 6
B
The metal tabs face inward and are located
at up when the unit is turned upright.
a)
Unpack the units and confirm that you have all hardware and required parts.
b)
Orient and fit both Upper Stretchers (D and E) and Lower Back Stretcher (F) onto the U-shaped
brackets on the Left Side Frame (B) with the holes aligned. Fasten them into place with three
15mm Bolts (H1) and the Washers (H2 and H3). Tighten the bolts with the provided hex wrench.
c)
Repeat the same procedure to attach the Right Side Frame (C) at the other end.
H2 x 6
H1
H2
H3
F
E
D
H3 x 6
6 |
C
P a g e