Idiomas disponibles
Idiomas disponibles
FEATURES
ES
▶Power: 45W
▶Speeds: 3 levels
▶Fixed or oscillating position
PT
▶Security grill
▶Blade diameter: 40cm
▶220-240V~ 50/60Hz
EN
FAN PARTS
1. Front grille
2. Washer
FR
3. Helix
4. Thread
5. Rear grille
6. Box connections
7. Switch for oscillating function
8. Cable
9. Speed switches
ASSEMBLY INSTRUCTIONS
1. Remove all the packaging carefully, avoid scratching the
plastic with treasures or knives.
2. Unscrew because of the plastic protection present on the
motor side.
3. Insert the rear grille at the front of the motor shaft. Make
sure that the central holes are aligned with the axis.
4. Insert the fixing thread of the grille and surround to
directly lock the rear grille (Fig. 1)
5. Enter the ring of the motor.
Instruction manual
6. Insert the fixing ring of the blade in the center of the blade
and around it in a non-counterclockwise direction to tighten
(FIg.2)
7. Cover the front grille by adjusting the laces.
8. Tighten or secure the lock with a split key (Fig.3)
RUNNING
▶Through the 3-speed system you can start the fan, this system is
IMPORTANT NOTES
▶Place the fan on a flat, dry surface.
▶Before connecting the device to the network, make sure that the
▶Plug the power cord into the outlet 220-240V~ 50/60Hz
▶If you do not use the fan for a long time, please unplug the power
▶Never try to disassemble the device where the motor is located.
▶If you notice any abnormality (such as unusual fan noise), turn off
▶Make sure that no objects or liquids enter the interior of the fan
▶The fan should only be used in dry environments.
designed to give you maximum flexibility. You can also activate the
oscillation function using the oscillation slider.
• POSITION 0: OFF position, no button pressed.
• POSITION 1: first speed
• POSITION 2: second speed
• POSITION 3: third speed
• OSCILLATION: oscillation button /fixed position
switch is in the "0" position.
cord from the outlet.
the device and unplug it immediately.
through any openings.
Ref. 33964
