Idiomas disponibles
Idiomas disponibles
Button
Function
•
After approx. 250 hours of operation, the indicator
over the filter button lights up to remind the user to
clean the filter.
•
After cleaning the filter, press and hold the filter
button for 3 seconds to switch the filter indicator off
Filter (F)
and to zero the filter counter.
•
Press to toggle between continuous operation and
operation on demand.
•
Button indicator on - Continuous operation:
The product operates continuously and absorbs
as much humidity as possible.
•
Button indicator off - Operation on demand: Set
manually the desired room humidity with the < >
buttons (J). The setting is shown on the display (D).
The adjustable value is 35 % RH to 85 % RH.
Continuous
–
After no button was pressed for 5 seconds,
operation
the setting is saved and the display (D) switches
(G)
to the actual room humidity.
–
The product switches off, when the desired room
humidity is undercut by 1 %.
–
The product switches on, when the desired room
humidity is exceeded by 5 %.
•
Press to increase the fan speed for a faster room air
circulation. The button indicator lights up.
•
Press again to set the fan speed to normal speed.
The button indicator goes off.
Turbo (H)
•
Set a timer when the product will switch on or off.
Press the button to toggle between the on and the
off timer. Which timer is actually selected is shown by
the timer indicators (C).
•
Set the timer with the < > buttons (K). The setting
is shown on the display (D). The adjustable value is
Timer (I)
0.5 hour to 24 hours.
on timer
off timer
(Continue on next page)
EN
9
