Main Characteristics; Optional Accessories - BlueWeld BCP 28 LCD Manual De Instrucciones

- Only use electrodes that are recommended for the machine (see spare parts
list) without altering their shape.
- RISK OF BURNING
worn.
- RISK OF TOPPLING AND FALLS
- Place the spot welder on a horizontal surface that can suitably support the
mass; constrain the spot welder to the supporting surface (when indicated
danger of toppling exists.
- It is forbidden to lift the spot welder, excluding where expressly indicated in
electric and pneumatic (if present) power supplies before moving the unit
to another work area. Pay attention to obstacles and unevenness on the
ground (for example cables and piping).
- UNINTENDED USE
It is dangerous to use the spot welder for any purpose other than that for
which it is intended (see INTENDED USE).
SAFEGUARDS AND SHIELDS
The safeguards and mobile parts of the spot welder casing must be in position,
before connecting it to the power supply.
- Replacement of or maintenance on the electrodes
STORAGE
- Place the machine and its accessories (with or without packaging) in closed
areas.
- The environmental temperature must be between -15°C and 45°C.
If the machine has a water cooling unit and the environmental temperature is
hydraulic circuit and the water tank.
Always use suitable measures for protecting the machine from humidity, dirt
and corrosion.
2. INTRODUCTION AND GENERAL DESCRIPTION

2.1 MAIN CHARACTERISTICS

Their main characteristics are:
Operation:
-
-
pedal valve.

2.2 OPTIONAL ACCESSORIES

3. TECHNICAL DATA
3.1 RATING PLATE (FIG. A)
the rating plate and have the following meanings:
14- Weight of welding device.
rating plate of the spot-welder itself.
3.2 OTHER TECHNICAL DATA (FIG. B)
4.2 CONTROL AND ADJUSTMENT DEVICES
4.2.1 Control panel (FIG. D1).
/
6-
4.2.2 Description of the icons (FIG. D2).
Spot welding parameters (1-7):
1-
2-
3-
4-
5-
6-
7-
8-
9-
11-
12-
13-
14- save /
15-
power.
4.2.3 Setting of the spot welding parameters
- "EXTENDED" = EXPERT mode: allows the selecting of all the welding parameters
machine.
machine electrodes.
descent speed of the electrodes.
4.2.5 Pressure and pressure gauge regulation (FIG. D4 - PCP mod. only)
4.2.6 Air and water couplings (FIG. G and H)
4.3.1 Main switch
Emergency function
Opening the spot welding machine when it is operating (position "I" => position "O") will
- 6 -