Vox EBC200DBR1 Manual De Instrucciones página 19

How to Use
Start Cooking
After power on, the buzzer beeps once, all the indicators light up for 1 second then go out, indicating
that the ceramic hob has entered the stat of standby mode.
Touch the ON/OFF control. all the indicators
show "-"
Touching the heating zone selection control .
Finish Cooking
Touching the heating zone selection control
that you wish to switch off.
Turn the whole cooktop off by touching the
ON/OFF control.
Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the
surface of the cooking zone are clean and dry.
Select a heat setting by touching the "-" or "+"
control.
• If you don't choose a heat setting within 1
minute, the ceramic hob will automatically
switch off. You will need to start again at step 1.
• You can modify the heat setting at any time
during cooking.
• By holding down either of these buttons, the
value will adjust up or down.
Turn the cooking zone off by scrolling down to
"0" or touching "-" and "+" control together.
Beware of hot surfaces
"H" will show which cooking zone is hot to touch.
It will disappear when the surface has cooled
down to a safe temperature. It can also be used
as an energy saving function if you want to heat
further pans, use the hotplate that is still hot.
17
OR