Invacare Aquatec Pure Bidet Manual Del Usuario página 9

1. Press POWER SAVING button L repeatedly, until "SUPER"
LED R illuminates.
• Water and seat temperature maintain normal
temperature.
Power saving mode is temporarily released when
toilet light turns on. It returns to normal mode from
power saving mode even if occupying the seat in
dark condition.
2. Press POWER SAVING button once.
• Power saving mode deactivates and "SUPER" LED
turns off.
Perform Hip Bath Function
1. Press HIP BATH button T on the remote control.
The hip bath function operates for 3 minutes (The
nozzle moves slightly forwards and backwards).The
lowest level of water pressure and the highest level
of water temperature is pre-set.
2. Press HIP BATH button again to stop the nozzle moving
forwards and backwards.
3. Press STOP button to cancel the hip bath function.
6 Maintenance
6.1 Maintenance and Servicing
If the cleaning and safety notices are observed, the product
will be maintenance free.
WARNING!
– Check the product regularly for damage and
ensure that it is securely assembled.
– In the event of damage and/or necessary
repairs, contact your provider immediately.
– The product should be checked by a qualified
technician before every re-use or after 24
months at the latest.
6.2 Cleaning and Disinfection
General Safety Information
CAUTION!
Risk of Contamination
– Take precautions for yourself and use
appropriate protective equipment.
NOTICE!
Wrong fluids or methods can harm or damage
the product.
– All cleaning agents and disinfectants used must
be effective, compatible with one another and
must protect the materials they are used to
clean.
– Never use corrosive fluids (alkalines, acid etc.)
or abrasive cleaning agents. We recommend
an ordinary household cleaning agent such as
dishwashing liquid, if not specified otherwise in
the cleaning instructions.
– Never use a solvent (cellulose thinner, acetone
etc.) that changes the structure of the plastic
or dissolves the attached labels.
– Always make sure that the product is completely
dried before taking into use again.
For cleaning and disinfection in clinical or long-term
care environments, follow your in-house procedures.
1590625-G
Cleaning Intervals
NOTICE!
Regular cleaning and disinfection enhance smooth
operation, increases the service life and prevents
contamination.
Clean and disinfect the product:
– regularly while in use,
– before and after any service procedure,
– when it has been in contact with any body
fluids,
– before using it for a new user.
Cleaning Instructions
DANGER!
Electric shock hazard
– Observe the safety information for electrical
safety, see 2.1 General Safety Information, page
2 .
– Do not use high pressure or steam cleaners /
autoclave.
– Do not touch the power socket with wet hands.
– Make sure that no water splashes to the plug
or the wall outlet.
Cleaning the Shower Toilet
1. Disconnect the power plug from the wall outlet before
cleaning the unit.
2. Clean the unit with moist, well-wrung soft cloth. For
excessive stains, use soft cloth moistened with mild
detergent solution.
3. Wipe out the device with a dry cloth.
Cleaning the Water Strainer
B
A
1. Close the water supply by turning the shut off valve
clockwise.
2. Detach the PVC flexible hose A from the inlet adapter B.
3. Detach the strainer C from the inlet adapter with a
pointed object.
4. Thoroughly clean the strainer with a soft brush.
5. Reinsert the strainer on the inlet adapter.
6. Attach the PVC flexible hose to the inlet adapter.
7. Open shut off valve fully by turning counterclockwise.
Cleaning the Nozzles
A
1. Press "CLEANSING / STOP" and "POWER SAVING" buttons
simultaneously on the control panel.
• The nozzle A comes out and stops.
2. Clean the nozzle manually with a soft brush.
3. Press "CLEANSING / STOP" button.
• The nozzle returns to its storage position and the
self cleaning function is automatically activated.
C
9