Invacare Aquatec Pure Bidet Manual Del Usuario página 4

Aquatec® Pure Bidet
4 Setup
4.1 Installation / Assembly
The Aquatec Pure Bidet fits standard toilets. It is suitable for
all types of water supply connection with a flushing cistern
(top, bottom, sideways).
In some regions, tap water contains particularly high levels
of lime. Limescale build-up can impair the function of the
product and promote the spread of germs. Systems for
softening the tap water or the installation of a limescale filter
prevents limescale build-up deposits and can have a positive
effect on the lifetime of the product.
WARNING!
Risk of being scalded by hot water
– Only connect the shower toilet to a cold water
supply.
WARNING!
Electric Shock Hazard
– Do not connect the power until installation is
finalized.
Preparing the Toilet
1.
C
B
Remove the existing toilet seat A and all its fixation
elements B and C from the toilet bowl.
2.
Close the shut off valve D clockwise and drain the toilet
water tank completely by flushing.
4
3.
Detach the water supply hose E on the part of the shut
off valve F.
If part E is a rigid pipe, it must be replaced by a
flexible hose.
4. Mount the T-valve G between shut off valve and water
supply hose.
If the T-valve does not fit onto the water supply,
adapter pieces are necessary.
Assembling the Shower Toilet
1.
A
Press lever A to detach the catch plate B from the bidet.
2.
Insert the supplied packing nuts C into the fixing holes
on the toilet bowl.
One pair of standard packing nuts with a diameter
of 14 mm are included. If the fixing hole diameter
on the toilet bowl is less than 14 mm other suitable
packing nuts and washers need to be used.
A
B
1590625-G