3. Close the battery and tighten the two screws clockwise.
4. Tighten the screws clockwise to close the battery cover firmly.
Radio Battery Meter
Battery full bars indicates battery high
mode and will indicate low battery alert in the forms of alert tone and blinking bar display.
Note:
- Remove the battery from radio for storage purposes. Batteries may corrode over time and cause
permanent damage to your devices.
- Charge the supplied NiMH batteries once every 3 months when not in use.
Using the Micro-USB Charger
The micro-USB charger is a handy port that allows you to conveniently charge your NiMH battery.
Use certified adaptor(5V, ≥1A). Do not attempt to charge alkaline batteries.
1. Make sure your radio is turned OFF.
2. Plug the micro-USB cable into the micro-USB charging port on your radio. Connect the other end
of the micro-USB charger to wall power outlet.
3. The battery meter on LCD will move to indicate the battery is charging.
Turning your Radio On and Off
1. Press and hold on the
2. The display screen then shows the current channel, code and all features that are enabled.
Setting the Volume
1. Press
to increase the volume. Press
2. When the volume reached level 0 the mute
Insert 3 AA Ni-MH
Batteries.
. When battery meter shows 1 bar, device is on low battery
button to turn your radio ON/OFF.
to decrease the volume.
icon appears permanently on screen.
Close the battery
cover.
11
