V-TAC VT-2002 Manual De Instrucciones página 5

PRECAUTIONS FOR USE
1. ⑦ Press the button, the screen lights up, about 60 seconds after the screen backlight
automatically closed.
2. When ②④⑧⑨the button is pressed, the output port is turned on to power the device.
3.When the power output port is not used, press the 2,4,8,9 button to turn it off to save
power.
4. Low temperature may affect the battery capacity of the product, the product can be
charged in the temperature range of 0 ~ 40 °C, in the temperature range of-10 ~ 40°C for
equipment use.
5. The first use of the product is recommended to be fully charged, to avoid the lack of power
to your use of inconvenience. After the device is fully charged, the fan will continue to work
for about 2 minutes after the charging power cord is unplugged, which is used for cooling the
device (the specific time may vary with the scene temperature) , pay attention to prevent dust
particles or foreign matter from being inhaled into the equipment, otherwise it will easily lead
to internal equipment damage.
6. After the discharge is terminated, the device fan will continue to work to reduce the device
temperature to a reasonable temperature for about 30 minutes (the time may vary with the
scene temperature) . At the same time charge and discharge, current more than 15A or
equipment temperature is too high, will trigger automatic power-off protection.
7. During the charging and discharging process, please connect the device with the charging
and discharging device, then turn on the charging and discharging. Otherwise, there might
be a spark.
CHARGING MODE
Before using or storing the product, please use the charger to charge the product. When
charging, the indicator light is blue. The LED screen will display the current charging ratio and
charging power. When the LED screen shows 100% power, it means full charge. The charging
process is about 2 hours. The current power can be viewed through the LED screen.
Standard charger,
about 2 hours
Car charger
about 2 hours
700W solar photovoltaic panel,
about 5 hours.
(the charging time is determined by the intensity of sunlight).
Support solar photovoltaic panel MPPT function charging (12-60V)
The above data are from the laboratory. The test data may vary due to the use environment,
use method and other factors, and the charging time will be different.