HoMedics TOTALCLEAN AP-DT10 Manual De Instrucciones E Información Sobre La Garantia página 6

Idiomas disponibles

Idiomas disponibles

HOW TO USE
BEFORE TURNING THE UNIT ON
• Take the air purifier out of the box and remove the clear protective plastic bag.
• Place the air purifier on a firm, level surface.
• Plug the power cord into a standard AC outlet.
POWER BUTTON AND FAN SPEED SETTINGS
• To turn the air purifier on, press the power
• This air purifier has 3 fan speed settings: low (1), medium (2), and high (3). The higher the fan speed
setting, the faster the air will be purified. To select or change fan speed, press the fan speed
until the desired setting is reached.
IONIZER SETTING WITH ON/OFF
Ion particles have a positive or negative charge that attach to airborne particles, making them easier to be
captured by the filtration system. Press the ionizer
to indicate the ionizer is in use. Press the ionizer
NOTE: Dust particles may accumulate on surfaces around the air purifier when the ionizer is in use. These
dust particles can be vacuumed or wiped away with a soft, damp cloth.
NOTE: You may hear occasional popping sounds when the ionizer is used. This is normal.
NOTE: The ionizer produces less ozone than the UL-established limits of 0.05 ppm. Ozone may be harmful
around birds and small pets. To prevent ozone buildup, use the ionizer feature in a well-ventilated area.
TIMER
Press the timer
button until the desired timer setting is lit on the display. The timer
through the following settings: 4 hours, 8 hours, 12 hours, and off. To cancel the timer at any time, press the
timer
button until all timer LEDs are off. The air purifier will run continuously when the timer function is
off.
OIL TRAY
Use essential oil (not included) to deliver scent into the air.
NOTE: For use with the included HoMedics essential oil pads only. Do not add essential oils anywhere else in
the unit as it may cause damage.
NOTE: Do not leave a filled essential oil pad in the air purifier if it will be out of use for a long period of time.
button.
button to turn the ionizer on. The blue light will glow
button again to turn the ionizer off.
6
button
button will cycle
loading