Idiomas disponibles
Idiomas disponibles
B
Product usage
4.
In Bluetooth mode, press the
speaker). The master speaker's indicator light will flash orange and blue. The master
speaker will confirm that they are both connected in TWS mode and the indicator light
will flash blue while the secondary speaker's indicator light will be a steady orange colour.
5.
Connect the external Bluetooth device to the speakers via its Bluetooth settings. Choose
the pairing name of the main speaker. Once connected, the master speaker will beep
once, and the LED light will become a steady blue colour.
6.
Press the
button on either speaker to exit TWS mode. A beep will sound, and your
external device will now only be connected to one speaker.
7.
Press and hold the
will sound to confirm.
NOTE:
•
You can only connect the two speakers whilst in Bluetooth mode. Once the
two speakers have been connected in TWS mode, they will automatically
reconnect with each other should they be turned off and back on again.
•
You can only connect a LEASH speaker with another LEASH speaker. You
cannot pair the LEASH speaker with other TWS-compatible models or brands
of speakers.
•
If you want to connect to a different speaker in TWS mode, delete the previous
connections before attempting to connect the new speaker.
•
If you are unable to connect the two speakers, turn them both off and start
the connection process again.
SD card reader
The contents of an SD card can be changed via a computer.
•
Turn the speaker off by pressing and holding the
•
Insert the Micro SD card into the SD card slot until it clicks into place.
•
Connect the speaker to the computer via a USB cable.
•
The speaker will enter the card reading mode and you can now add or remove files from
the SD card.
NOTE: The first time you connect the SD card to your computer, the driver will
automatically be installed.
Using the speaker to make phone calls
When your speaker is connected to a phone, computer or tablet via a Bluetooth connection,
it can be used to answer phone calls (as detailed below). You can also talk and listen to a
caller via the speaker.
button on one of the speakers (this will be the master
button on either speaker to cancel the TWS connection. A beep
28
EN
button.
