Idiomas disponibles
Idiomas disponibles
B
Product usage
NOTE: If, for any reason, the speaker does not automatically start the Bluetooth
search, you can press the
3.
When the Bluetooth device displays the speaker's Bluetooth name, LEASH, select the
name and confirm the pairing process. A beep will sound, and the Bluetooth indicator
light will become steadily lit to confirm that the devices have been successfully paired.
4.
Only one external device can be connected to the speaker at a time. Press and hold the
button to disconnect the Bluetooth connection and manually initiate the pairing process
for the new external device. A beep will sound to confirm the disconnection. You can also
disconnect the Bluetooth connection via the external device.
5.
Once paired, the devices should remember the connection and you shouldn't need to
pair them again. If the speaker does not automatically search for an existing Bluetooth
connection, press and hold the
Bluetooth device.
NOTE:
•
If the system's Bluetooth name does not appear on your Bluetooth device,
move the devices closer together. If that doesn't work, turn the devices off
and back on again before restarting the pairing process.
•
When pairing the devices, make sure they are less than 10 metres apart and
there are no physical obstructions between them.
•
If after 10 minutes, the speaker has not connected with another device, it will
automatically turn off to save power.
Operation
Turning the speaker on and off
•
Press and hold the
•
Press and hold the
will turn off.
•
If the unit is not used for 10 minutes, it will automatically turn off and you will hear a beep
sound. To turn it back on, press and hold the
Playback
1.
Turn the speaker on and set up your connection (as detailed above).
2.
Press the M button to select the audio mode: BT, SD, USB, AUX IN. A beep will sound
each time you enter a new mode.
3.
To control the audio playback, you can either use your external device's controls (if available)
or the following buttons on the speaker itself:
button to manually start the search.
button to reconnect the speaker to the last connected
button to turn on the speaker. A beep will sound.
button to turn on the speaker. A beep will sound, then the unit
26
EN
button.
