Idiomas disponibles
Idiomas disponibles
Attach the Binoculars to the Mount
(except 15x80MT-SX)
1
Using the three mount locking bolts provided
with the mount, secure the mount to a stable
base such as a tripod.
d If the mount is not fi rmly secured, the
mount and binoculars may fall off when
the binoculars are set on top, resulting in
damage or injury.
2
Align the indicator line on the mount with the 50°
position on the angle of elevation scale. Next,
tightly lock the elevation locking lever to prevent
the mount head from shifting in position.
d If the mount is not secured tightly enough,
it may be destabilized when the binoculars
are set on top, causing them to fall off .
3
Position the binoculars so that the groove on the
bottom of the tubes covers the mount head, then
lock the body underside positioning hook of the
binoculars with the slanted positioning plate on
the mount head.
4
Tighten the two screws on the mount head to fas-
ten the binoculars securely to the mount.
To remove the binoculars from the mount, fi rst perform
mounting screws and perform procedure in
2
, then loosen the the two binoculars
3
in reverse order.
ENGLISH
Mount
Locking
Bolts (x3)
Tripod
Body Underside
Positioning Hook
Slanted Positioning
Plate
EN-4
