Idiomas disponibles
Idiomas disponibles
chemical solution for may cause damage to the pad.
Your device takes water from the narrow section of the tank and pumps it on the cool-
ing pad. The water flowing through the cooling pad goes down to the large section of
the tank. The cycle results to absorption of dust and dirt in the air which makes the air
safer and fresher to breathe. The filter, that is located at the middle portion of the tank,
cleanses the water that passes through it and should be attached to its place before using
the unit.
TROUBLESHOOTING
Problem
1. The fan does not work 1. The power cord is not
2. The temperature of
the air being expelled is
not cold enough.
3. The machine conti-
nues working when pres-
sing the OFF button.
Possible cause
plugged or not plugged
properly.
2. The On/Off button at
the back panel is not tur-
ned to the ON position.
3. The ON button on the
control panel is not acti-
vated.
1. Dust accumulates on
the dust filter and the
cooling pad.
2. The water level in the
tank is below the "MIN"
level.
If you use the heating
function, the machine
needs to cool down to
avoid overheating
Solution
1. Plug the power cord
properly.
2. Press the On/Off but-
ton at the back panel to
the ON position.
3. Press the ON button
on the control panel.
1. Follow the steps of the
cleaning section.
2. Turn off the unit, refill
the tank with clean tap
water, turn on the power
and select the cooling
function.
The machine will be off in
30 seconds. Please wait.
