Idiomas disponibles
Idiomas disponibles
3. Wind: Press to choose the type of air. The indicator light will display the selected
type of wind:
a) Normal. A continuous wind blow that can be adjusted to low, medium or high
speed.
b) Natural. It provides a soft and comfortable environment with a selection of low,
medium or high speed.
c) Sleep. It operates at natural fan speed and slowly lowers the speed before turn-
ing it off altogether. At high speed, the cooler works for 6 seconds and then shifts
to medium speed, then it works at this speed for 6 seconds and the turns to low
speed. The cooler will turn off after 6 seconds or until the end of the preset time.
4. Timer: Press to set the working hours of the fan. You can choose between 1-12
hours. The indicator light will show the selected time and will operate until the
preset time passes. Continuously press the button to your desired running time. To
cancel the timer, simply press the button until the indicator shows "00".
5. Swing: Press to change the wind direction. The swing icon will appear on the
screen when the function is activated. Press the button again to stop the oscilla-
tion. The vertical direction of the air flow can be adjusted manually by directing the
outlet louvers up and down.
6. Cool: Press this key to active the air cooler function. Water pump will take the
water from the tank and pour it onto the cooling pad. The cooling pad absorbs the
heat of the water and the evaporated air is blown out through the fan. The cool
breeze drops the temperature and creates a relaxing cooling effect. Caution: If the
water level is low or there is no water in the tank, do not activate the "Cooler "
function. Check first the water level and add clean water if needed, also to replace
the stale water. It is recommended to replace the water in the tank at least once in
a week.
7. Warm: Press this key to active the heating function. The PTC heating element
inside the cooler can warm the air in 3 seconds. Press one time for low heating
(1000W) or two times for high heating (2000W). Press againt to cancel the heating
function. In order to protect the heating element, after using the heating function,
if you press the OFF button, the device will continue working for 30 seconds to cool
down.
8. Ion: Press to activate the ionizer function. The indicator light will signify that the
function is on as the negative ions releases. Ions attract harmful particles in the air
such as dust, pollen, mold, spores etc. which causes them to drop out of air, thus
making the air.
