PRIXTON Siesta Manual Del Usuario página 15

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
2.3 Technical Parameters
Working voltage 14,8 V  
Rated input voltage 19,0 V
Rated power 20 W   
Rated input current 0,6 A
Charging Dock KCH 217
Input parameter 19,0 V         0,6 A
Output parameter 19,0 V         0,6 A
Battery Li-ion 2000mAh
Due to continuous improvement of product,if any technology or design change is required,
no further notice will be informed.
3.Product Usage
3.1 Attention
1.Please remove the power cord, thread and other debris scattered on the ground before
using, avoid to trip or wind the machine.
2.Objects with less than 6cm such as bed furniture bottom may cause stuck when using,
please pay special attention to such areas when cleaning.
3.Before using this product on the carpet, please remove the two side brushed and roll the
carpet tassels.
4.This product can be used on wood floor, tile floor and cement floor and short hair carpet(-
less than 0.8cm)
3.2 Quick Actions
Main body charge (The machine has both manual and automatic charging modes)
Manual Charging
Adapter connects power and machine.
Start charging with green light flash.
Charging connection successfully.
Green light flashing, machine is in charging.
Green light steady, charging is complete.
Machine should be charged 8 hours at least for first time use.
Make sure water tank is empty before charging, otherwise the
floor will be wet
Auto-recharging
Place charging dock flat against the wall edge insure side 0.5m,
front 1.5m without any obstacle No strong reflective objects
around. Adapter connects power and charging dock
When the machine's power is low, it will automatically find the
charging dock for charging.
Users can also control the machine to find a charging dock
by using the automatic charging function on the APP and
remote control.
Turn on the machine
Turn on the machine power switch with an opening music
and green light.
("I"turn,"O"turn off )
Start cleaning
Short press button
Stop working
Short press button
start with auto cleaning mode.
machine. will stop working.
15
loading